SimpleTech ZeusIOPS Manual Pagina 74
- Pagina / 110
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
72 Zeus
IOPS
3.5-Inch Fibre Channel Solid State Drive
MODE PAGE 1CH - INFORMATIONAL EXCEPTIONS CONTROL MODE PAGE
The parameters of the table are as follows:
Bit
Byte76543210
0 PS = 0 SFP = 0 Page Code = 1Ch
1 Page Length = 0Ah
2 PERF Reserved EBF EWasc DExcept TEST EBackErr LogErr
3Reserved MRIE
4(MSB)
Interval Timer
7 (LSB)
8(MSB)
Report Count
11 (LSB)
Name Description
PS Parameters Saveable Pages cannot be saved, so the PS bit will be 0 for
MODE SENSE. This bit is reserved for the MODE
SELECT command.
SFP Subpage Format Is set to 0 to indicate that this is a page_0 mode page
format. This bit is not permitted to change.
PERF Performance Bit Is set to 0 to indicate that the informational exception
operations may impact performance. This bit is not
permitted to change.
EBF Enable Background Functions Is set to 0 to indicate that the background functions are
disabled. This bit is not permitted to change.
EWasc Enable Warning Bit If set to 0, the device shall disable the reporting of
warnings. If set to 1, the device shall report warnings as
specified by the MRIE field.
DExcept Disable Exception Control Is set to 0, indicates that threshold exceeded is
reported. The reporting method shall be specified by
the MRIE field.
TEST TEST The TEST bit set to 1 shall create a test failure at the
next time interval, as specified by the Interval Timer, if
the DExcept bit is set to 0. The TEST failure condition
will reported as FAILURE PREDICTION THRESHOLD
(FALSE). A MODE SELECT command that attempts to
set both the TEST bit and DExcept to 1 will be
terminated with CHECK CONDITION status, with the
sense key set to ILLEGAL REQUEST and the
additional sense code set to INVALID FIELD IN
PARAMETER LIST. A TEST bit set to 0 will indicate that
the device shall not generate test device failure
notifications. LogErr shall be set to 0 to indicate that the
logging of informational exceptions is vendor specific.
This field is not permitted to change.
EBackErr EBackErr This bit shall be set to 0 to indicate that the reporting of
background scan errors is disabled. This bit is not
permitted to change.
- Fibre Channel 1
- 3.5-Inch Solid State Drive 1
- Product Manual 1
- Trademark Information 2
- Disclaimer of Liability 2
- Copyright Notice 2
- CONVENTIONS 3
- REVISION HISTORY 5
- TABLE OF CONTENTS 7
- LIST OF TABLES 13
- LIST OF FIGURES 17
- OVERVIEW 19
- AUDIENCE 19
- REFERENCE DOCUMENTS 20
- PRODUCT DESCRIPTION 21
- PERFORMANCE CHARACTERISTICS 22
- MOUNT TIME 23
- ACCESS TIME 23
- DATA TRANSFER RATES 23
- ERASE TIMES 24
- SANITIZE 24
- HOT PLUGGING 25
- PREVENTATIVE MAINTENANCE 25
- ELECTRICAL SPECIFICATIONS 26
- GROUNDING 27
- FAULT LED OUT SIGNAL 27
- READY LED OUT SIGNAL 27
- SEL_ID FUNCTION 28
- P_ESI_n FUNCTION 29
- START_n MATED 30
- -DRIVE PRESENT 30
- DEV_CTRL_CODE_X 30
- INTERFACE SPECIFICATIONS 31
- SCA-2 INTERFACE CONNECTOR 32
- CONNECTOR LOCATION 32
- CONNECTOR PINOUT 33
- VOLTAGE AND GROUND SIGNALS 33
- FC-AL FEATURES 34
- FCP-SCSI COMMANDS 35
- EPORT LUNS (A0h) 37
- EST UNIT READY COMMAND (00h) 38
- ORMAT UNIT (04h) 38
- EASSIGN BLOCKS (07h) 39
- EAD (6) COMMAND (08h) 40
- RITE (6) COMMAND (0Ah) 40
- NQUIRY COMMAND (12h) 41
- ODE (6) SELECT (15h) 43
- ODE (6) SENSE COMMAND (1Ah) 44
- TART/STOP UNIT (1Bh) 45
- END DIAGNOSTIC (1Dh) 48
- EAD CAPACITY (25h) 48
- Table 29. Read Capacity CDB 49
- READ (10) EXTENDED (28h) 50
- RITE EXTENDED (10) (2Ah) 51
- RITE AND VERIFY (10) (2Eh) 51
- ERIFY (10) (2Fh) 51
- RITE BUFFER COMMAND (3Bh) 52
- EAD BUFFER (3Ch) 53
- EAD (10) LONG (3Eh) 54
- RITE (10) LONG (3Fh) 54
- YNCHRONIZE CACHE (10) (35h) 55
- EAD (10) DEFECT DATA (37h) 55
- RITE (10) SAME (41h) COMMAND 56
- OG SELECT COMMAND (4Ch) 56
- OG SENSE COMMAND (4Dh) 57
- ODE (10) SELECT (55h) COMMAND 58
- ODE SENSE (10) COMMAND (5Ah) 59
- UNSUPPORTED COMMANDS 61
- SMART SPECIFICATION 62
- DIAGNOSTICS 63
- SCSI IMPLEMENTATION 63
- EVENTS CURRENT VALUES 64
- LOG SENSE 65
- LOG SELECT 66
- SUPPORTED LOG PAGES 67
- LOG PAGE 2H - WRITE ERRORS 68
- LOG PAGE 3H - READ ERRORS 69
- VENT NOTIFICATION VIA SCSI 72
- Byte76543210 74
- Table 46 76
- FIBRE CHANNEL STANDARD 77
- FABRIC NODE CONNECTION 79
- Table 47. FCP Function Levels 81
- PHYSICAL CHARACTERISTICS 82
- EXTERIOR DIMENSIONS 83
- ENVIRONMENTAL CHARACTERISTICS 84
- AXIMUM COMPONENT TEMPERATURES 85
- ELATIVE HUMIDITY 86
- LTITUDE PARAMETERS 86
- HOCK AND VIBRATION 86
- AILURE CRITERIA 86
- OPERATING SHOCK AND VIBRATION 87
- DROP TESTING 87
- INSTALLATION 88
- DRIVE CONFIGURATION 89
- FAULT SIGNALS 89
- OWER-ON FAULT CONDITIONS 90
- PERATIONAL FAULT CODES 91
- DRIVE ORIENTATION 93
- PRIMARY HEAT GENERATION AREA 94
- COOLING REQUIREMENTS 95
- MOUNTING DIMENSIONS 96
- DRIVE INSTALLATION 97
- GROUNDING REQUIREMENTS 97
- MICROSOFT OS COMPATIBILITY 98
- SSD MANAGEMENT UTILITY 99
- DIAGNOSTIC SOFTWARE 99
- REGULATORY COMPLIANCE 100
- RADIO FREQUENCY EMISSIONS 101
- EMI TEST SITE CORRELATION 101
- VERIFICATION SAMPLES 101
- VERIFICATION TESTING 101
- ELECTROSTATIC DISCHARGE (ESD) 102
- Contact Information 103
- Ordering Information 103
- 102 Zeus 104
- 104 Zeus 106
- Regulatory Compliance 107
- SCSI Commands 107
- SMART Specification 107
- Unsupported SCSI Commands 108
- Warranty 108
- CERTIFICATION AND WARRANTY 109
- 61000-04522-101: Revision 1.6 110
Relacionado con productos y manuales para Redes SimpleTech ZeusIOPS
Redes SimpleTech STI-FAX/33.6 Guía de usuario
(0 paginas)
(0 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.038 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales