SimpleTech ZeusIOPS Manual descargar pdf (Pagina 87)

Zeus

IOPS

3.5-Inch Fibre Channel Solid State Drive 85

OPERATING SHOCK AND VIBRATION

For random vibration, the SSD will perform without errors after being tested at 15 min/axis on three

axes (X, Y and Z). During the operational vibration, the SSD will perform continuous reads. Operating

shock and vibration levels are listed in Table 54. In addition to the aforementioned Failure Criteria,

during the operating random vibration, the transfer rate of the SSD should not degrade by more than

10%.

Table 54. Operating Shock and Vibration

DROP TESTING

The SSD will withstand three (3) drops on a concrete floor from 1.524m (60 inches) on each of six

(6) axes, +/-X, +/-Y, and +/-Z, without any damage when packaged.

Parameter Value Condition

Operating Shock 1 G, half-sine, 2ms duration, 20Hz to 600Hz, 3 cycles per 3 axes.

Operating Vibration 60 G, RMS, random, 20Hz to 600Hz, 1 hour duration, 3 axes

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 109 110

Sin comentarios

SimpleTech ZeusIOPS Manual Pagina 87